CAMPAGNOLA MASTER Manuel D'utilisation Et D'entretien page 65

Pos. Denomination
2 Plug-in handle
3 ON-OFF switch
4 Fuse
5 Connector
6 Telescopic extension pole
7 Extension pole fixing clamp
8 Pole locking lever
9 Handle connector
10 Head connector
11 Pole connectors
12 Electromechanical head
13 Teeth
14 Teeth support
15 Connecting links
16 Fixing screws
17 Clamp
18 Power cable
19
Battery clamps
20
Battery connector
21
Coupling slides
22
Signal LEDs
23
Safety catch
24
Plug-in battery
3.4 ACCESSORY PARTS
This paragraph describes, where applicable, the accessory parts that can be supplied with the product.
The following are accessory parts for the product covered by this manual and supplied in the packaging:
- Quick guide,
- Certificate of Warranty,
- Declaration of conformity.
0310.0419_01
MASTER PLUG-IN
Fig. 3
To accommodate 12V or 21.6V battery connectors, switch and fuse
To turn the tool on and off
To protect the motor from overcurrents.
To connect the handle to the power cable
To support the tool
To adjust the length of the extension pole.
To lock the extension pole in the desired position
To connect the extension pole cable
To connect the extension pole cable
To electrically connect handle and head.
To house gearmotor and to support the rakes
To shake the branches
Set up to house teeth
To transmit movement to the teeth support
To lock the extension pole
Cable gland for 12V power supply
To connect the tool to the 12V lead-acid battery
To connect the cable to the corresponding poles on the battery
To connect the 21.6V battery
To plug the battery into the handle
To indicate the remaining battery capacity
To lock the battery in the handle
To power the tool
65
Function