CAMPAGNOLA MASTER Manuel D'utilisation Et D'entretien page 82

This is followed by hazard and prohibition pictograms relating to residual risks that remain.
Please refer to paragraph 1.4 for a description of these.
5. INSTALLATION
CAUTION
Before reading this chapter, for the safe use of the product, please consult Chapter 4 'Safety'.
5.1 PACKING AND UNPACKING
The product, in order to be protected and not be damaged during shipment, is usually packed and transported
from the manufacturer to the customer using suitable packaging (cardboard box; suitcase, etc.).
The packaged unit weight does not exceed 20 kg, so it can be easily handled without any special help.
CAUTION!
The handling of loads must be carried out in compliance with the current safety rules in the workplace. Keep
the box to store the tool for medium or long periods or to put it away after use or to ship it packaged to an
Assistance Centre for any repairs.
The information and pictograms necessary for shipping are printed on the product packaging.
Upon receipt of the product, both the integrity of the packaging and the contents must be checked to ensure
that no damage has occurred during shipment.
If you notice any damage due to shipping, send a written complaint, documented by photographs of the
damaged parts, to CAMPAGNOLA S.r.l. no later than 8 days after delivery of the product.
Check carefully that the contents correspond exactly to the shipping documents.
When disposing of the packaging, the user must comply with the regulations in force in his country.
Disposal of the packaging is the responsibility of the user/customer.
5.1.1 STORAGE
The packaged product can normally be stored in a closed environment as long as the temperature is not lower than -
10 °C or higher than +50 °C and the relative humidity does not exceed 80% (without condensation).
No other packages must be placed on top of the packaging.
Special care must be taken for fragile materials.
Follow the position indications marked on the packaging.
Special care must be taken during loading, unloading, transport, so as to avoid shocks and damage.
Make sure that the packaging has not been damaged during these operations.
No damaged packaging shall be repaired by the customer.
0310.0419_01 82