Publicité
Les langues disponibles
Les langues disponibles
•
Unlock the lever (8) on the telescopic extension pole.
•
Adjust the length of the telescopic pole to the working height.
•
Lock the lever (8).
To complete the assembly of the product, it is now necessary to connect the power supply.
If you have a 12V lead-acid battery (not included) the connection between battery and tool is the same whether
you have the handle (1) or the plug-in handle (2).
However, if you have a 21.6V lithium-ion battery (not included) the only possible connection is on the plug-in handle
(2).
With a 12 V lead-acid battery, use the power cable (18) to connect the tool to the battery and proceed as follows.
•
Take the power cable (18) out of the package
•
Insert the cable connector (18) into the slot (17) under the handle (1 or 2).
•
Connect the power cable (18) to the connector (5).
0310.0419_01
84
Publicité
