Publicité
Les langues disponibles
Les langues disponibles
Tool combination
Continuous A-weighted sound pressure level at the operator's position (LpA) and sound power level of the tool
(LwA), both measured according to standard EN ISO 3744.
(**) The frequency-weighted root mean square vibration values of the acceleration to which the hand-arm system is
exposed (for both lower and upper handle) are measured according to EN ISO 5349-1 and 2
ELECTROMAGNETIC COMPATIBILITY LEVEL
The machine contains electronic components subject to Electromagnetic Compatibility regulations, affected by
conducted and radiated emissions.
Emission values comply with regulatory requirements through the use of components that comply with the
Electromagnetic Compatibility Directive, suitable connections and installation in accordance with the requirements of
the component suppliers.
The machine therefore complies with the Electromagnetic Compatibility (EMC) directive.
2.3 REPRESENTATION OF AVAILABLE MODELS
This paragraph shows the possible and permitted combinations for the tool described in this manual.
1) 12 V model handle
3) Short telescopic extension
pole
6) Harvesting head
CAUTION
It is forbidden to make combinations other than those permitted, as they may cause faults, damage or
malfunction.
0310.0419_01
Vibration level (**)
1 - 3 - 6
1 - 4 - 6
1 - 5 - 6
2 - 3 - 6
2 - 4 - 6
2 - 5 - 6
4) Medium telescopic extension pole
Vibration level ahe
q
Lower handle
-
3.36 m/s²
3.36 m/s²
-
-
-
Products table
2) 12 V / 21.6 V plug-in handle
Fig.1
62
Vibration level ahe
q
Upper handle
-
3.22 m/s²
3.21 m/s²
-
-
-
5) Long telescopic extension pole
Publicité
