Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT!
To properly identify the product, refer to the type, serial number and year of manufacture shown on
the identification plate and quote them to CAMPAGNOLA S.r.l. for any service. assistance or spare
parts request.
IMPORTANT!
The CE marking is unique and it certifies the conformity of the product with the machinery directive
and the other applicable directives in compliance with the conditions prescribed and shown in this
manual.
With a machine/product consisting of several parts, a CE plate/label is affixed to the product and an
identification label on the main unit (e.g. ATRA.xxxx) to identify it.
IMPORTANT!
The customer is in charge of checking the integrity of the CE plate/label.
The user must replace the CE and/or warning plates which become illegible due to wear.
It is strictly forbidden to remove the plates/labels on the product.
CAMPAGNOLA S.r.l declines any responsibility on the safety of the product in case of non-
compliance with this prohibition.
The CE marking is placed on the product as shown in the following figure.
Below is a facsimile of the Declaration of Conformity supplied with the product:
(*) A detailed list of the directives and standards applied can be found in the declaration of conformity supplied
with the product.
4.5 LIMITS OF USE
The product is intended for the use and operation described in chapter 3 of this manual.
The use of unsuitable material or not within the working range of the product can cause serious damage and
impair its proper functioning.
0310.0419_01
70
Publicité
