Lenz Digital plus LH101 Mode D'emploi page 225

System setup
Possible error messages:
Proceed with care when deleting a locomotive address
from the command station memory. If an address is
deleted, the command station will no longer send data to
the locomotive. In case of a power interruption, the
locomotive may lose the information.
Press the rotary knob to select this option.
The first locomotive in the command station
memory is displayed.
Turn the rotary knob to select the locomotive
address that you want to delete ...
... press the rotary knob to confirm your
selection.
The confirmation is displayed.
Press the 'Esc' key several times to return to
"Controlling locomotive".
If no locomotive addresses are saved in the
command station memory, you will receive
this error message.
The message will disappear automatically;
you are back in the system setup.
Press the 'Esc' key to return to "Controlling
locomotive".
105