Setting Mode 0 - Lenz Digital plus LH101 Mode D'emploi

LH101 setup (device setting)

14.2.2 Setting mode 0

If you want to reset the LH101 that is in club mode 1 or 2 to the
"standard" mode, proceed as follows:
Action
Press the rotary knob to select this option.
You can now choose between "Clubmodus
1/Club mode 1" and " Clubmodus 2/Club
mode 2".
(If the LH01 is in mode 1 or 2, this menu is
not available).
Press the rotary knob to select the desired
club mode.
You are asked to enter a four-digit number as
password.
Press the rotary knob to complete the
process.
The
locomotive". The restrictions of the selected
club mode are enabled.
Display
Proceed
(address or speed step are displayed)...
... press the 'M' key and keep it pressed
until ...
LH101 returns
Explanation
"Controlling
from
83
"Controlling
to
locomotive"