52
If the locomotive currently controlled is a conventional
analogue locomotive (address 0), the option "multiple
traction" is not available.
Press the rotary knob to select the option.
Turn
the rotary
einfügen/Add locomotive".
Press the rotary knob to select the option.
You are asked to enter the multiple traction
address.
Enter the TR address (1-99).
Use the
key to delete or correct your entry.
Press the rotary knob to confirm the MTR
address.
The locomotive called up last is offered to you
first.
If you want to add this locomotive, press the
rotary knob.
Turn the rotary knob to select additional
locomotives from the stack to add to the
MTR.
Operating manual LH101
knob to
display
"Lok