Deleting A Locomotive From A Multiple Traction - Lenz Digital plus LH101 Mode D'emploi

Multiple traction (MTR)

11.6 Deleting a locomotive from a multiple traction

You can delete any locomotive that is part of an MTR at any time.
When deleting a locomotive from an MTR, this locomotive
must be located on the layout! Only then can the
locomotive decoders receive the special MTR commands
sent over the track!
If a command to delete does not reach the locomotive
decoder (due to bad contact or because you have
removed the locomotive from the layout), the MTR address
saved in the locomotive decoder is not deleted and the
locomotive cannot be operated with its own address.
Action
Turn the rotary knob to scroll through the
locomotives that are part of the MTR.
Press the rotary knob to select the desired
locomotive.
Display
Call up a locomotive that is part of the MTR or
the MTR address itself.
Press the 'M' key. Since you have selected an
MTR or a locomotive that is part of the MTR,
you
"Mehrfachtraktion/Multiple traction".
Press the rotary knob to select the option.
Explanation
are offered
55
the option