Lenz Digital plus LH101 Mode D'emploi page 186

66
If the CV cannot be read out via Railcom, you can enter the desired
value directly:
In this example, the value "006" was read
from CV 3.
Delete the displayed value to enter a new
value or turn the knob to change the value.
... and press the 'locomotive' key to complete
the entry process.
You can now enter the desired value...
... in this example value "6".
Press the 'locomotive' key to confirm your
entry and to start programming. Alternatively,
press the rotary knob.
The value of the CV is displayed.
You can now use the rotary knob to change
the value. The new value is immediately
entered into the decoder. This is particularly
useful if you want to e. g. change the
brightness of the locomotive lighting.
Alternatively, press the '<=' key to enter
another value using the key pad ...
... and start programming again.
Press the 'Esc' key to return to entering the
CV.
Press the 'Esc' key again to return to
"Controlling locomotive".
Operating manual LH101