Lenz Digital plus LH101 Mode D'emploi page 212

92
14.10 Select language
This menu option is available from version 1.02 onwards.
In ex-factory setting, the default language is "German". Using the
menu "Select language" you can change the language to "English".
This setting will remain stored until the LH101 is reset to the ex-factory
setting again.
Action
Turn the rotary knob to set the desired
interval. Times between 250ms and 1500ms
can be set.
Press the rotary knob to confirm your
selection. You receive a confirmation.
Press the 'Esc' key to move up one level in
the menu ...
... until you return to "Controlling locomotive".
Display
The starting point is locomotive control ...
... switch to the general menu.
Turn the knob until the "Setup LH101" option
is displayed.
Press the rotary knob.
Operating manual LH101
Explanation