Setting Routes - Lenz Digital plus LH101 Mode D'emploi

42
8

Setting routes

Before you can set routes, you have to create routes in the
LH101. The creating, editing and deleting of routes is
described from
The setting of a route is similar to the setting of points and signals:
Action

page 34 onward.
Display
Proceed from "Controlling locomotive".
Use the 'points/signals' key to change to the
menu for switching points and signals.
Turn the rotary knob to scroll through the
created routes (if no routes have been
created, "Speicher leer/Storage empty" is
displayed).
When you have reached the route created
last ...
... you will again see the first one.
Press the rotary knob to set the route.
The point addresses and settings saved in
the route are ...
... displayed one after the other.
Operating manual LH101
Explanation