Important Advice, Please Read First - Lenz Digital plus LH101 Mode D'emploi

6
1

Important advice, please read first!

The LH101 manual control is a component of the
system and was submitted to intensive testing before delivery. Lenz
Elektronik GmbH guarantees fault-free operation if you follow the
advice below:
Depending on the command station and the software version used,
certain functions of the LH101 will not be available or only partially
available. Relevant information is contained in the beginning of each
section.
The LH101 may only be operated with Digital plus by Lenz
components. Any use other than that described in this operating
manual is not permitted, and all guarantees will become invalid if the
LH101 is used inappropriately.
Connect your LH101 only to devices designated for such connection.
This operating manual will tell you which devices are suitable. Even if
other devices (including those of other manufacturers) are equipped
with the same plug connectors, you must not operate the LH101 with
these devices. The same plug connector does not automatically mean
that operation is permitted. This also applies to other model railway
controls.
Do not expose the LH101 to moisture or direct sunlight.
If you have problems
First check this operation manual to see if you may have missed a
direction for use. The table of contents and especially the section
"Troubleshooting" will help you.
Illustration of step-by-step instructions:
In this operating manual, all entries made using the keypad
are shown on the left. On the right you will see what is shown
on the display after the entry has been made.
All steps described assume that the manual control is
connected to a version 3.6 Digital plus by Lenz
that this system is turned on.
Illustration of displays and keys in the text:
Operating manual LH101
Digital plus by Lenz
Explanation
®
®
system
®
system, and