Reading Out And Programming A Cv - Lenz Digital plus LH101 Mode D'emploi

74
If you see this display while reading out the address,
multiple traction address 33 is programmed in the
locomotive decoder with address 5678 and the locomotive
is set to operate with the MTR address 33.
If you enter a new address, the MTR address will be
deleted!

13.3.4 Reading out and programming a CV

Action Display Explanation
Proceed from
locomotive".
Change to the general menu.
Select the relevant menu entry
... and confirm your selection.
Turn the rotary knob until "Programmieren
CV/Programming CV" is displayed ...
... and confirm your selection. You
are asked to enter the CV whose
value you want to read out or
change.
Enter the number of the CV using
the keypad ...
(press the
entry if necessary)
Operating manual LH101
"Controlling
key to correct your