Setting Club Mode 1 Or 2 - Lenz Digital plus LH101 Mode D'emploi

82
Mode 2: It is possible to control the locomotive set and to switch
functions 0 to 9.
All other operating options are blocked.
Mode 0: This is the ex-factory setting. The entire range of operating
options is available.
Mode 1 and mode 2 are secured by a password (a four-digit number).
This password is required to return to mode 0.
Note down the password.
If you forget the password, it is no longer possible to set
mode 0.
If you have forgotten the password and require help,
please contact our customer support.

14.2.1 Setting club mode 1 or 2

Action Display
Select the locomotive address that you want
to operate in club mode 1 or 2.
Press the 'M' key.
Turn the rotary knob until the option "Setup
LH101/LH101 setup" is displayed.
Press the rotary knob to select this option.
Press the rotary knob until the option
"Clubmodus/Club mode" is displayed.
Operating manual LH101
Explanation