Changing Function Groups - Lenz Digital plus LH101 Mode D'emploi

Controlling locomotives
Function group 1:
Function group 2
Function group 3
Function group 4
Function group 5
Function group 6
The bottom line of the display indicates the function status: If the
function number is visible, the function is enabled; if the number is not
visible, the function is disabled.
A function can be set to permanent or temporary operation (
5.3.1

Changing function groups

The selected function group is indicated at the bottom left of the
display.
Action
After the initial operation of the LH101, function group 0 is enabled.
10 11 12
20 21 22
30 31 32
40 41 42
50 51 52
60 61 62
Display
Function group 0 is displayed, functions 0, 1,
3 and 8 are enabled.
Briefly press the 'F' key to change to the next
function group:
Function group 1 is displayed, functions 12,
13, 15, 17 and 19 are enabled.
Function group 2 is displayed, functions 20,
21, 22 and 28 are enabled.
Shows function group Fg0 again.
13 14 15 16 17
23 24 25 26 27
33 34 35 36 37
43 44 45 46 47
53 54 55 56 57
63 64 65 66 67
Explanation
25
18 19
28 29
38 39
48 49
58 59
68

p. 26).