Displaying And Changing The Speed-Step Mode - Lenz Digital plus LH101 Mode D'emploi

Masquer les pouces Voir aussi pour Digital plus LH101:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

28

5.4 Displaying and changing the speed-step mode

The range from stop to maximum speed of a locomotive is divided into
speed steps. The more steps, the smaller the division.
With the LH101 you can set 2 different divisions (also called „speed
step modes"): 28 or 128 speed steps.
The speed step is saved in the command station together
with the corresponding locomotive address. This means
that you can set the mode 28 speed steps for one
locomotive address and the mode 128 speed steps for
another locomotive address.
To display or change the speed step mode:
Action
Turn the rotary knob to select another
"refresh setting":
Functions F0 to F12 are transmitted cyclically.
Functions F0 to F20 are transmitted cyclically.
Functions F0 to F28 are transmitted cyclically.
Functions F0 to F4 are transmitted cyclically.
Press the rotary knob to confirm your
selection.
Display
Call up the locomotive address whose speed-
step mode you want to display or change.
Operating manual LH101
Explanation

Publicité

Table des Matières
loading

Table des Matières