Lenz Digital plus LH101 Mode D'emploi page 129

Function overview of the LH101
signals
Routes
Club modes
Displaying feedback
information
Configuring decoder
settings
Programming in
operational mode (PoM)
PoM reading
System settings
signals and other magnetic articles. (p. 31)
Additional operating options have been integrated for
convenient switching of turnouts.
You can save up to 16 routes with 16 steps each in the
LH101. (p. 34)
The LH101 is capable of two so-called "club modes" in
which certain functions are blocked. This ensures that
model railway enthusiasts who are not fully familiar with
the LH101 may also join in the fun (p. 81).
This function of the LH101 manual control allows you to
display the status of the inputs of LR100/101 feedback
modules (p. 59).
You can change the address, starting delay, and other
locomotive decoder features through programming. Two
methods are available:
You can configure the settings of your locomotive decoder
while the locomotive is placed anywhere on the layout. For
example, drive your locomotive in front of a heavy freight
train and adjust the starting delay to the train! (p. 64).
With an LZV200 and the LH101 (from version 2.0) it is
possible to read CVs of locomotive decoders that support
this procedure during operation.
The settings of your locomotive decoder are configured on
a separate programming track (p. 71).
The register mode has been implemented to allow the
setting of old decoders.
The LH101 allows you to configure several system
settings. For example, you can configure the behaviour of
the emergency stop button, read out the software version
of your command station, and much more. (p. 99)
9