The Rotary Knob Of The Lh101 - Lenz Digital plus LH101 Mode D'emploi

16

4.4 The rotary knob of the LH101

When switching from one locomotive to another, the rotary knob will –
of course – take over the speed of the new locomotive, adjustment is
not necessary.
A single locomotive (L) with address 0003
is being controlled.
The direction of travel is forward.
The speed step is 16 of 28.
Function group 0 has been selected;
functions F0 and F1 are enabled.
A single locomotive (L) with address 0260
is being controlled.
The speed step is 02 of 28.
Function group 2 has been selected;
function F21 is enabled.
The locomotive with address 1234
operates in a multiple traction.
The speed step is 012 of 128.
Function group 1 is set. Functions F10,
F12 and F15 are enabled.
The multiple traction with address 33 is
being controlled. The speed step is 04 of
28.
The locomotive with address 0003 is
being controlled in the "shunting mode".
Operating manual LH101