Deleting A Complete Mtr - Lenz Digital plus LH101 Mode D'emploi

Multiple traction (MTR)

11.7 Deleting a complete MTR

You can also delete the complete multiple traction.
When deleting a complete MTR, all locomotives in the
MTR must be located on the layout! Only then can the
locomotive decoders receive the special MTR commands
sent over the track!
If a command to delete does not reach the locomotive
decoder (due to bad contact or because you have
removed the locomotive from the layout), the MTR address
saved in the locomotive decoder is not deleted and the
locomotive cannot be operated with its own address
Action Display
Call up the multiple traction that you want to
delete.
Press the 'M' key. You are offered the option
"Mehrfachtraktion/Multiple traction".
Press the rotary knob to select the option.
Turn the rotary knob until "Mehrfachtraktion
löschen/Delete multiple traction" is displayed.
Press the rotary knob. A security query is
displayed. Press the 'Esc' key to cancel the
process.
Press the key again to delete the complete
MTR.
Explanation
57