Lenz Digital plus LH101 Mode D'emploi page 214

94
14.12 Stopping condition (from version 2.1)
With the stop condition you set the reaction of the LH101 when you
press and hold the rotary knob.
... press the 'M' key
Turn the knob until the option "Setup LH101"
is displayed.
Pressing the knob selects this option.
Turn the knob until the "Illumination time"
option is displayed and press the knob.
The currently set lighting time is displayed.
Turning the knob changes the setting.
Pressing the rotary knob saves the selected
setting.
You can now select another setup option or ...
... by pressing 'Esc' twice ...
... return to locomotive control.
Operating manual LH101