Lenz Digital plus LH101 Mode D'emploi page 215

LH101 setup (device setting)
Notaus: Switches off the voltage on the track (all moving
locomotives stop).
Notstop: Stops the locomotive last controlled with the LH101R by
command.
Action Display
The starting point is locomotive control ...
... press the 'M' key
Turn the knob until the option "Setup LH101"
is displayed.
Pressing the knob selects this option.
Turn the knob until the "Stopping condition"
option is displayed and press the knob.
The current stopping condition is displayed.
Turn the knob to select the desired stopping
condition.
Pressing the rotary knob saves the selected
setting.
You can now select another setup option or ...
... by pressing 'Esc' twice ...
... return to locomotive control.
Explanation
95