Enabling And Disabling The "Auto" Mode - Lenz Digital plus LH101 Mode D'emploi

System setup

15.2 Enabling and disabling the "AUTO" mode

The "AUTO" mode is a special feature of the LZ100/LZV100/LZV200
command stations. When enabled, the command station remembers
Set the desired minute ...
... and press the rotary knob.
Use the rotary knob to select the setting of
the time factor.
Press the rotary knob, ...
... set the desired time factor ...
... and confirm by pressing the rotary knob.
Press the 'M' key to save the settings in the
LZV200 command station.
At the end of the write operation, the LH101
returns to the "clock setting" menu.
Press 'Esc' to return to "setup system", ...
... another pressure brings you back to
locomotive control.
101