Maintenance And Technical Support; References To The User Manual; Basic Safety Standards For Machine Maintenance And Technical Support - Orved Cuisson 31 Mode D'emploi Et D'entretien

MAINTENANCE AND TEChNICAl SUPPORT

11. MAINTENANCE AND TEChNICAl SUPPORT

11.1 REfERENCES TO ThE USER MANUAl

Symbols in the manual: see USER section 2.1.
handling and unpacking: see USER section 4.
Installation: see USER section 7.
Routine maintenance (cleaning) and scheduled periodic maintenance: see USER section 10.

11.2 bASIC SAfETy STANDARDS fOR MAChINE MAINTENANCE AND TEChNICAl SUPPORT

Maintenance and/or repairs must be carried out in accordance with the following rules:
ElECTRICAl hAZARD!
• The power sources must be disconnected before performing maintenance and/or repairing any com-
ponent of the appliance (Disconnect the electrical plug from the mains).
DANGER!
• It is prohibited to remove the guards and safety devices in order to carry out maintenance operations.
ORVED S.p.A. declines all liability for accidents due to non-compliance with the above-mentioned obli-
gation.
ATTENTION!
• Always use suitable preventive measures and protective clothing (gloves, etc.) for any maintenance and/or
repairs.
• Only qualified technicians must perform maintenance or access live parts of the machine as specified in this
chapter.
• Only original spare parts must be used and requested: spare parts that are not type-approved could damage
the appliance or cause physical injury.
• Always cite the model and serial number of the machine (see section 1.4) in order for us to ensure efficient sup-
port and to best answer your questions.
62
Rev. 01 - 03/2018 - Cod. 1500024 - Instruction manual for vacuum chamber packaging machines for vacuum cooking mod.
Cuisson