Replacing The Under-Bar Bearing - Orved Cuisson 31 Mode D'emploi Et D'entretien

MAINTENANCE AND TEChNICAl SUPPORT

11.4 REPlACING ThE UNDER-bAR bEARING

1) Extract the sealing bar by lifting it horizontally at both ends (fig. 1).
fig. 1
2) Extract the under-bar bearing and put in the new one (fig. 2).
fig. 2
3) Put the sealing bar back in the tank, making sure it engages correctly
with the electrical contacts (fig. 3).
fig. 3
64 Cuisson
Rev. 01 - 03/2018 - Cod. 1500024 - Instruction manual for vacuum chamber packaging machines for vacuum cooking mod.