General Information; Manufacturer's Identification; Appliance Identification; Technical Features - Orved CUISSON SV-31 Mode D'emploi Et D'entretien

CUISSON SV-31 • SV-41
2.

GENERAL INFORMATION

2.1

MANUFACTURER'S IDENTIFICATION

Head Office:
ORVED Srl Soc. Unipersonale - Via dell'Artigianato, 30 - 30024 MUSILE DI PIAVE (VE) ITALY
Tel.: ++39 0421 54387 / Telefax: ++39 0421 333100
E-mail: orved.ve@tin.it - Internet: www.orved.it
2.2

APPLIANCE IDENTIFICATION

The appliance is identified by means of a rating plate (see image) applied on the back, which bears the following information:
General data:
• Manufacturer's Name and Address:
Orved Srl - Via Dell'Artigianato, 30 - 30024 MUSILE DI PIAVE (VE)
• Model and CE marking

Technical features:

• Rated voltage, frequency and power
WARNING: It is absolutely forbidden to tamper with, engrave, alter, or remove the nameplate from the appliance. Do not
cover it with adhesive tape or other such material as it must always be clearly visible.
WARNING: If the nameplate is found to be damaged for any reason whatsoever, (detached from the machine, damaged or
only partly legible) notify the manufacturer immediately.
2.3

TECHNICAL SERVICE

2.3.1 WARRANTY
All ORVED products are normally subjected to severe quality and functional checks before installation to ensure safety and in the interests of our
Clients.
2.3.1.1 COVER
All ORVED products are covered by a warranty for manufacturing and machining defects, and we undertake to replace parts found to be defective
by the manufacturer free of charge.
2.3.1.2 DURATION
ORVED products come with a twelve-month warranty from the date indicated on the purchase document.
2.3.1.3 GENERAL CONDITIONS
According to the ORVED warranty:
a) The warranty gives exclusive rights for free replacement of components acknowledged as defective by ORVED or our authorized representative.
b ) ORVED's responsibility is limited exclusively to replacing parts found to be defective; we shall not acknowledge claims for any other kind of
damage.
c) The Client is entirely responsible for returning disputed and/or defective parts to the ORVED office, and all transport charges for delivering the
parts.
d ) Parts subject to normal wear are excluded from the warranty.
e ) Repairs, if any, do not in any manner lead to extension of the warranty.
2.3.1.4 TERMINATION
Apart from the normal validity period, the warranty will immediately lapse in the following cases:
a) Appliance nameplate tampered with, altered in any manner or removed without informing the manufacturer immediately.
b ) Modifications on the appliance or its parts without written authorization from the manufacturer. Tampering with the appliance or its parts, apart
from invalidating the warranty, will free ORVED of all liability for all damage to persons, animals or objects.
c) Failure to respect the indications in this Manual.
d ) Using the appliance for purpose other than that specified in this Manual.
e ) Damage or accident to the appliance deriving from outside factors.
f) Conduction, repair and/or maintenance operations carried out by untrained personnel.
2.3.2 NOTIFYING DEFECTS OR FAULTS
WARNING: Defects and faults must be notified to the area dealer or directly to the manufacturer.
2.3.3

ORDERING SPARE PARTS

WARNING: Spare parts must be ordered from the area dealer or directly from the manufacturer, indicating the article code
(See SPARE PARTS Chapter).
REV. 01 - Cod.: 1500288
GENERAL INFORMATION
31
Operation and maintenance manual / Ed. 11 - 2008
EN
EN