Replacing The Pump Oil - Orved Cuisson 31 Mode D'emploi Et D'entretien

MAINTENANCE AND TEChNICAl SUPPORT

11.7 REPlACING ThE PUMP OIl

1) Run the pump for about 10 minutes in Jar or Pump mode to make the oil fluid.
2) Press the STOP button or disable Pump mode to stop the pump.
3) Switch the appliance off at the ON/OFF master switch and remove the plug from the mains socket.
4) Take the PE shelves out of the tank (fig. 1).
5) Position the machine with its back near the edge of the work table.
6) Close the lid by lowering the lid-catch hook.
fig. 1
7) Use the screwdriver to remove the screws of the rear panel. Remove the panel (fig. 2).
fig. 2
70 Cuisson
Rev. 01 - 03/2018 - Cod. 1500024 - Instruction manual for vacuum chamber packaging machines for vacuum cooking mod.