Information Displayed At Start-Up; Display Of The Number Of Cycles Performed Before The Oil Must Be Replaced; Display Of The Serial Number - Orved Cuisson 31 Mode D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

OPERATION

9.2.1 INfORMATION DISPlAyED AT START-UP

Upon start-up, the information below is displayed in sequence:
fhASE
DISPlAy
wait
1
2
3
WARNING!
• Along with the above mentioned signals, an alarm message to change the pump oil is displayed upon start-
up if the maximum number of cycles admissible has been reached (see next § 9.2.3).
• If a functioning anomaly occurs with an overheating of the pump or of the safety device, the relative alarm is
displayed immediately and the machine does not accept controls until the anomaly has been cleared.

9.2.2 DISPlAy Of ThE NUMbER Of CyClES PERfORMED bEfORE ThE OIl MUST bE REPlACED

The number of cycles performed since the last oil change is displayed upon each start-up.
The number of cycles performed is graphically represented by the number of LEDs turned on.
If all the LEDs light up, this means the maximum number of cycles has been reached for the pump oil to be replaced and
an "oil change alarm" is displayed.
The cycles must be reset by an authorised after-sales centre once the pump oil has been replaced.
To recall the exact number of cycles performed by the machine, turn on the machine
and press the "PUMP" and "STOP" buttons together.
The lower display will show the number of cycles performed since the last reset.

9.2.3 DISPlAy Of ThE SERIAl NUMbER

To recall the serial number of the machine, press the "PUMP" and "STOP" buttons together.
44
Rev. 01 - 03/2018 - Cod. 1500024 - Instruction manual for vacuum chamber packaging machines for vacuum cooking mod.
MESSAGE ON ThE DISPlAy
lEDs: All ON
upper lED: WAIT
lower: SOfTWARE VERSION: NR.02
lEDs: NUMbER Of CyClES PERfORMED bEfORE ThE OIl MUST bE
REPLACED (E.g:4 LEDS OUT OF 12 = 33% OF ThE CYCLES PERFORMED)
upper LED: SET – UP
lower: OPTIONS AVAIlAblE: SOfTAIR, ETC.
lEDs: NUMbER Of CyClES PERfORMED bEfORE ThE OIl MUST bE
REPLACED (E.g:4 LEDS OUT OF 12 = 33% OF ThE CYCLES PERFORMED)
upper LED: SET – UP
lower: VAlUES Of ACTIVE fUNCTIONS
Cuisson

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cuisson 41Cuisson 41hCuisson 61

Table des Matières