Description
This manual outlines the implantation procedure for both the DBS Lead and DBS Directional Lead
and intraoperative testing with the External Trial Stimulator 2 (ETS 2). The DBS lead consists
of eight cylindrical contacts and is compatible with all Boston Scientific DBS Simulators. The
DBS Directional lead consists of eight contacts with two rows of contacts that are separated
circumferentially to allow both axial and rotational stimulation selectivity. The Directional Lead is
compatible with all Boston Scientific DBS Simulators except the Vercise Stimulator, model number
DB-1110.
Note: The implantation procedure and intraoperative testing for the DBS leads with the External
Trial Stimulator 1 (ETS 1) is provided in the Vercise Physician Manual.
Package Contents
DBS Lead Kit
(1) Lead with preloaded Straight Stylet
(1) Torque Wrench
(1) Lead Boot
(1) Lead Stop – Screw and Ring
(1) 1 cm Suture Sleeve
(1) 1 cm Split Suture Sleeve
(1) 2.3 cm Suture Sleeve
(1) 4 cm Suture Sleeve
Note: All contents of the inner package (or tray) are sterile and non-pyrogenic.
DBS Directional Lead Kit
(1) Directional Lead with preloaded Straight Stylet
(1) Torque Wrench
(1) Lead Boot
(1) Lead Stop – Screw and Ring
(1) 1 cm Suture Sleeve
(1) 1 cm Split Suture Sleeve
(1) 2.3 cm Suture Sleeve
(1) 4 cm Suture Sleeve
Note: All contents of the inner package (or tray) are sterile and non-pyrogenic.
Vercise™ DBS Leads Directions for Use
91172963-02 REV A 1 of 329