Local Control - Parker AC30V Série Manuel Technique

Local Control

Parameters::Keypad::Local Control
These parameters configure the use of the GKP keys for local start / stop control of the drive.
PNO Parameter Descriptions
1140
Run Key Action
Defines the use of the green run key in local mode.
0. RUN
1. JOG
When RUN is selected, pressing the green Run key will start the drive using Local Reference as the active setpoint. To stop the drive
press the RED Stop key.
When JOG is selected, pressing the green Run key will start the drive running using the Jog Setpoint as the active setpoint. The
drive will stop when the key is released.
1253
Local/Rem Key Active
Enables the L/R soft key function. This is used to change between Local and Remote sequencing modes from the GKP.
1255
Local Dir Key Active
Enables the ability to change the direction from the GKP when running in local sequencing mode. When FALSE the direction will
always be positive.
1239
Local Run Key Active
Enables the green Run key function when in local sequencing mode. When FALSE the Run key is ignored, (for both RUN and JOG
modes).
1240
Local Reverse
Used to change the direction the motor will rotate when in local sequencing mode. When FALSE the direction will be "Forwards".
When TRUE the direction will be reverse.
AC30V series Variable Speed Drive
D-55
Parameter Reference