Parker AC30V Série Manuel Technique page 263

Fluxing VHz
Parameters::Motor Control::Fluxing VHz
Designed for VOLTS/Hz motor Control Mode.
This function allows user parameterisation of the conventional (volts/hertz) fluxing strategy of the Drive. This is achieved through three flexible
Volts-to-frequency templates. Starting torque performance can also be tailored through the Fixed Boost, Acceleration Boost and Auto Boost
parameters.
PNO Parameter Descriptions
0422
VHz Shape
Type of volts to frequency template to flux the motor. The choices for this parameter are:
Enumerated Value : VHz Shape
0 : LINEAR LAW
1 : FAN LAW
2 : USER DEFINED
3 : APPLICATION DEFINED This gives a user the ability to set up and apply fluxing law from the application layer.
V/F SHAPE
OUTPUT VOLTS
100%
AC30V series Variable Speed Drive
This gives a constant flux characteristic up to the Base Frequency (see Motor Nameplate function).
This gives a quadratic flux characteristic up to the Base Frequency. This matches
the load requirement for fan and most pump applications
This gives a user defined flux characteristic up to the Base Frequency.
CONSTANT
TORQUE
RANGE
LINEAR
QUADRATIC LAW
f B
= BASE FREQUENCY
CONSTANT
POWER RANGE
(field weakening)
FREQUENCY
f B
D-37
Parameter Reference