Parker AC30V Série Manuel Technique page 317

SD Card
Parameters::Device Manager::SD Card
Details of the SD Card fitted in the Drive.
PNO Parameter Descriptions
1033
Card State
The state of the SD Card will either be:
0: NO CARD
1: INITIALISING
2: READY
3: CARD FAULT
1034
Card Name
The Volume Label read from the card. This is normally entered when formatting the card. It may be left blank.
1038
Firmware
TRUE indicates that the firmware upgrade file (firmware.30x) is present on the inserted SD Card.
1039
Project Archive
TRUE indicates that the project archive file (archive.prj) is present on the inserted SD Card and that the contents of this file matches
the loaded Project.
FALSE indicates that either the project archive file is not on the SD Card or that the archive file does not contain the archive of the
loaded Project.
AC30V series Variable Speed Drive
no card detected in slot
a card has been detected but is still preparing for use
the card inserted can be used
the card inserted is faulty and cannot be used
D-91
Parameter Reference