Parker AC30V Série Manuel Technique page 276

D-50
Parameter Reference
PNO Parameter Descriptions
0003
Anout 01 Type
Analog output 1 is associated with terminal X11.3
The signal processing electronics for analog output 1 supports two output ranges:
0.
1.
0686
Anout 01 Scale
The scale is a simple multiplication factor applied to 0042 Anout 01 Value.
1108
Anout 01 Offset
The offset is expressed as a percentage of the hardware range selected by 0003 Anout 01 Type. For example, with the -10..10V
range an offset of 10% is equivalent to 1v on the output.
The demand value 0042 Anout 01 Value is multiplied by 0686 Anout 01 Scale then added to the Offset. The resultant value is then
limited to -100 to 100%, (for the -10..10V type) or 0..100%, (for the 0..10V range).
1441
Anout 01 ABS
When ABS is set TRUE, the absolute value of the result of combining 0042 Anout 01 Value, 0686 Anout 01 Scale and
1108 Anout 01 Offset is used to drive the output electronics.
0004
Anout 02 Type
Analog output 1 is associated with terminal X11.4
The signal processing electronics for analog output 2 supports three output ranges:
1.
2.
3.
1460
Anout 02 Scale
The scale is a simple multiplication factor applied to 0043 Anout 02 Value.
1467
Anout 02 Offset
The offset is expressed as a percentage of the hardware range selected by 0004 Anout 02 Type. For example, with the 4..20mA
range an offset of 10% is equivalent to 1.6mA on the output.
The demand value 0043 Anout 02 Value is multiplied by 1460 Anout 02 Scale then added to the Offset. The resultant value is then
limited to 0..100%.
1468
Anout 02 ABS
When ABS is set TRUE, the absolute value of the result of combining 0043 Anout 02 Value, 1460 Anout 02 Scale and
1467 Anout 02 Offset is used to drive the output electronics.
-10..10V
0..10V
0..10V
0..20MA
4..20MA
AC30V series Variable Speed Drive