Parker AC30V Série Manuel Technique page 253

PNO Parameter Descriptions
1121
Comms Option Pcode
The product code string that may be used to order an equivalent Communications Option, (only visible when a Communications
Option is selected).
1129
Comms Option Serial
The serial number of the fitted Communications Option, (only visible when a Communications Option is selected).
1125
IO Option Pcode
The product code string that may be used to order an equivalent IO Option, (only visible when an IO Option is selected).
1134
IO Option Serial No
The serial number of the fitted IO Option, (only visible when an IO Option is selected).
1254
IO Option SW Version
For intellilgent IO options this parameter shows the version of the firmware running in the option.
0688
Drive Diagnostic
Indicates the health of the drive configuration. When the drive configuration includes a mutually conflicting requirement, this
parameter indicates the problem; for example, it attempting to run in Closed Loop Vector control mode when no feedback option is
configured.
1551
Product Code Flags
Manufacturing flags byte read from the power electronics stack.
Bit 0
Bit 1 – 7
AC30V series Variable Speed Drive
When set, indicates that the dynamic brake switch power electronics is fitted. On larger frame sizes the brake switch is
a factory fit option. On frames C,D,E,F and G this bit is ignored.
Reserved
D-27
Parameter Reference