Ambient Conditions In The Place Of Operation; First Installation - Corghi ARTIGLIO UNIFORMITY Manuel D'utilisation

The surface must have a load-carrying capacity of at least 1000 kg/m

Ambient conditions in the place of operation

- Relative humidity from 30% to 95% without condensation.
- Temperature 0°C - 50°C.

3.4. FIRST INSTALLATION

The machine is normally delivered
in the configuration illustrated
aside: with the tool holder arm
folded in, the arm aperture control
valve moved to the right and the
bead breaker arm completely
forwards.
These parts may move
during transport, and the relative pneumatic
actuator cylinders may expel air.
Before connecting the machine to the com-
pressed air supply, check that the arms and
controls are in the correct positions described
above.
No movement is obtained with this operation, but the pressure in the cylinders is
restored; the operations can be carried out after this initial phase.
Each time the machine remains disconnected from the pneumatic line for long
periods, check the direct operation of the controls with the relative arm, following
the pressure restoration procedure. Carry out the first control operation very slowly..
122
CAUTION!
CAUTION!
CAUTION!
.
2
Artiglio Uniformity User Manual