Publicité
•
Regularly check that the warning and safety labels on the machine are in perfect and
legible condition.
Use only proper and suitable tools.
•
•
Only use original spare parts recommended by the manufacturer.
20.1
Inspection and maintenance plan
The type and degree of machine wear depends to a large extent on the operating conditions. The
following intervals apply when the machine is used within the specified limits:
Interval
Before start of work or
after every maintenance or
servicing
Weekly
Annually or after every
1000 operating hours
As needed
20.1.1
Adjusting the taper gibs
Too much play in the guideways can be reduced by adjusting the taper gibs. To adjust, turn the
adjustment screw clockwise. This pushes the taper gibs backwards and reduces the clearance of
the respective guideway.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Component
Guideways
Change Gears
Camlock
Clamping Bolts
Turning Spindle
Adapter
Feed gear
Apron
Head Stock
Lead Screw
Feed Shaft
Tailstock
Top Slide
Cross Slide
Lathe Slide
Feed Gear
Apron
Head Stock
Guideways
Head Stock
Coolant
What to do?
oiling
lubricate lightly with grease
Check fastening
Visual inspection of the oil levels (via sight
glass)
Grease or fill all grease nipples and
lubricators with machine oil.
Grease or fill all grease nipples and
lubricators with machine oil.
Change oil
Adjust taper gib
Check V-belt and tighten if necessary
Fill in
MAINTENANCE
82
ED1000KDIG | ED1500KDIG
Publicité
