Publicité
18.3.2
Switching on the machine
Note that the machine can only be started if the EMERGENCY STOP is unlocked, the
jaw chuck guard is closed and all position switches are activated.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Half nut opened
Metric thread
Longitudinal feed
engaged (top)
Both feeds
disengaged (middle)
Cross feed engaged
(bottom)
Electric voltage
Power indicator light
NOTICE
To switch on the machine, turn the main switch (1) to position ON
and the motor-step-switch (2) to the position "I" or "II". The main
switch of the machine is located on the back of the headstock.
When the machine is switched on, the operating control lamp
lights up permanently.
The machine is started by actuating the shift lever rotating
direction (3).
Right-hand thread and longitudinal feed to the
headstock side (left illustration)
Left-hand thread and longitudinal feed to
tailstock side (right picture)
OPERATION
Half nut closed
Imperial thread
Oil inlet
Do not change speed
or direction of
rotation during
operation!
Intermittent push
button
Emergency-Stop
70
ED1000KDIG | ED1500KDIG
Publicité
