Publicité
15.3
Safety devices
The machine is equipped with the following safety devices:
15.4
General safety instructions
To avoid malfunctions, damage and health hazards when working with the machine, the following
points must be observed in addition to the general rules for safe working:
Before start-up, check the machine for completeness and function. Only use the machine if
•
the guards and other non-parting guards required for machining have been fitted, are in
good operating condition and have been properly maintained.
Choose a level, vibration-free, non-slip surface for the installation location.
•
Ensure sufficient space around the machine!
•
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
•
Ensure a clean working environment.
•
Only use perfect tools that are free of cracks and other defects (e.g. deformations).
•
Remove tool keys and other adjustment tools before switching on the machine.
•
•
Keep the area around the machine free of obstacles (e.g. dust, chips, cut parts, etc.).
•
Check the strength of the machine connections before each use.
Never leave the running machine unattended. Switch off the machine before leaving the
•
working area and secure it against unintentional or unauthorised recommissioning.
•
The machine may only be operated, serviced or repaired by persons who are familiar with it
and who have been informed of the hazards arising from this work.
•
Ensure that unauthorised persons maintain a safe distance from the machine and keep
children away from the machine.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
•
A self-locking Emergency Stop button on the headstock
to stop dangerous movements at any time.
A jaw chuck guard (1) with position switch. The machine
•
only switches on when the jaw chuck guard is closed.
•
A protective cover on the headstock with position switch
(2). The machine only switches on when the protective
cover is fitted.
A spiral spring as a protective cover on the leadscrew
•
(prevents clothing from being drawn in)
An overload clutch on the feed spindle
•
SAFETY
57
ED1000KDIG | ED1500KDIG
Publicité
