Publicité
4. Install:
Washer 1
G
Bearing race cover 2
G
5PA51550
5. Install:
Steering ring nut 1
G
Tighten the steering ring nut using the
steering nut wrench 2.
Refer to "STEERING HEAD INSPECTION
AND ADJUSTMENT" section in the CHAP-
TER 3.
5PA51560
6. Check the steering stem by turning it lock
to lock. If there is any binding, remove the
steering stem assembly and inspect the
steering bearings.
5PA51570
7. Install:
Front fork 1
G
Upper bracket 2
G
NOTE:
Temporarily tighten the pinch bolts (lower
G
bracket).
Do not tighten the pinch bolts (upper bracket)
G
yet.
5PA51580
8. Install:
Washer 1
G
Steering stem nut 2
G
5PAR0018
5 - 49
CHAS
STEERING
4 Nm (0.4 m · kg, 2.9 ft · lb)
125 Nm (12.5 m · kg, 90 ft · lb)
Publicité
