Télécharger Imprimer la page

Yamaha YZ85V Manuel D'atelier Du Proprietaire page 178

Publicité

REAR SHOCK ABSORBER SPRING PRELOAD
ADJUSTMENT
REAR SHOCK ABSORBER SPRING
PRELOAD ADJUSTMENT
1. Elevate the rear wheel by placing the suit-
able stand under the engine.
2. Remove:
Rear frame
G
3. Loosen:
Locknut 1
G
4. Adjust:
5PA30630
Spring preload
G
By turning the adjuster 2.
Stiffer → Increase the spring preload.
(Turn the adjuster 2 in.)
Softer → Decrease the spring preload.
(Turn the adjuster 2 out.)
* For EUROPE
NOTE:
Be sure to remove all dirt and mud from
G
around the locknut and adjuster before
adjustment.
5PA30640
The length of the spring (installed) changes
G
1.5 mm (0.06 in) per turn of the adjuster.
CAUTION:
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
5. Tighten:
Locknut
G
6. Install:
Rear frame (upper)
G
Rear frame (lower)
G
3 - 28
INSP
ADJ
Spring length (installed) a:
YZ85:
215 mm (8.46 in)
*212 mm (8.35 in)
YZ85LW:
207 mm (8.15 in)
*212 mm (8.35 in)
Extent of adjustment:
202.5 ~ 218.5 mm
(7.97 ~ 8.60 in)
26 Nm (2.6 m · kg, 19 ft · lb)
16 Nm (1.6 m · kg, 11 ft · lb)

Publicité

loading

Ce manuel est également adapté pour:

Yz85Yz85lwYz85lwv