Publicité
Part number
YU-33975, 90890-01403
Steering nut wrench
This tool is used when tighten the steering ring nut to
specification.
YM-01434, 90890-01434
Rod holder
This tool is used to hold the fork spring.
YM-01437, 90890-01437
Rod puller
90890-01436
Rod puller attachment (M10)
These tools are used to pull up the fork damper rod.
YM-01442, 90890-01442
Fork seal driver
This tool is used when install the fork oil seal.
YM-01454, 90890-01454
Damper rod holder
Use this tool to remove and install the damper rod.
YM-01495, 90890-01495
Drive gear holder
This tool is used when removing or tightening the pri-
mary drive gear securing nut.
YU-3112-C, 90890-03112
Pocket tester
Use this tool to inspect the coil resistance, output
voltage and amperage.
YM-91042, 90890-04086
Clutch holding tool
This tool is used to hold the clutch when removing or
installing the clutch boss securing nut.
YM-34487
Dynamic spark tester
90890-06754
Ignition checker
This instrument is necessary for checking the ignition
system components.
ACC-QUICK-GS-KT
Quick gasket
90890-85505
YAMAHA Bond No. 1215
This sealant (Bond) is used for crankcase mating sur-
face, etc.
Tool name/How to use
1 - 8
SPECIAL TOOLS
Illustration
YU-33975
YM-01434
YM-01437
YM-01442
YM-01454
YM-01495
YU-3112-C
YM-91042
YM-34487
ACC-QUICK-GS-KT
GEN
INFO
90890-01403
90890-01434
90890-01437
90890-01436
90890-01442
90890-01454
90890-01495
90890-03112
90890-04086
90890-06754
90890-85505
Publicité
