Publicité
È
É
È
FRONT BRAKE AND REAR BRAKE
5PA50290
5PA50300
É
5PA50310
5PA50320
EC5A3000
REMOVAL POINTS
Brake fluid
1. Remove:
[Front]
Brake master cylinder cap 1
G
[Rear]
Reservoir tank cap 1
G
NOTE:
Do not remove the diaphragm.
È Front
É Rear
2. Connect the transparent hose 2 to the
bleed screw 1 and place a suitable con-
tainer under its end.
È Front
É Rear
3. Loosen the bleed screw and drain the
brake fluid while pulling the lever in or
pushing down on the pedal.
CAUTION:
Do not reuse the drained brake fluid.
G
Brake fluid may erode painted surfaces or
G
plastic parts. Always clean up spilled
fluid immediately.
Front brake caliper
1. Remove:
Brake caliper 1
G
NOTE:
Turn the brake caliper counterclockwise and
pull out it from the guide pin 2 on the brake
caliper bracket.
5 - 13
CHAS
Publicité
