Publicité
HANDLEBAR
7. Install:
Engine stop switch 1
G
Clutch lever holder 2
G
Bolts (clutch lever holder) 3
G
Clamp 4
G
NOTE:
The engine stop switch and clutch lever holder
should be installed according to the dimen-
5PA51420
sions shown.
5PA51430
8. Install:
Clutch cable 1
G
NOTE:
Apply the lithium soap base grease on the
clutch cable end.
5PA51440
9. Adjust:
Clutch lever free play
G
Refer to "CLUTCH ADJUSTMENT" section
in the CHAPTER 3.
10. Clamp the clamp portion a of the number
plate to the handlebar.
11. Insert the end of the fuel tank breather
hose 1 into the hole of the steering stem.
5PA51450
5 - 45
CHAS
4 Nm (0.4 m · kg, 2.9 ft · lb)
Publicité
