Publicité
HANDLEBAR
EC5B5000
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
Handlebar 1
G
Handlebar upper holder 2
G
Bolt (handlebar upper holder) 3
G
NOTE:
5PA51330
The handlebar upper holder should be
G
installed with the punched mark a forward.
First tighten the bolts on the front side of the
G
handlebar upper holder, and then tighten the
bolts on the rear side.
5PA51340
2. Install:
Left grip 1
G
Apply the adhesive to the handlebar 2.
NOTE:
Before applying the adhesive, wipe off
G
grease or oil on the handlebar surface a
with a lacquer thinner.
Install the left grip to the handlebar so that
G
the arrow mark (L) faces straight upward.
5PA51350
3. Install:
Right grip 1
G
Apply the adhesive on the tube guide 2.
NOTE:
Before applying the adhesive, wipe off
G
grease or oil on the tube guide surface a
with a lacquer thinner.
Locate the mating mark b on the grip as
G
shown.
5PA51360
5PA51370
5 - 43
CHAS
27 Nm (2.7 m · kg, 19 ft · lb)
Publicité
