Publicité
WATER PUMP
2. Install:
Bearing 1
G
NOTE:
Install the bearing by pressing its outer race
parallel.
5PA41330
Impeller shaft
1. Install:
Impeller shaft 1
G
Washer 2
G
Impeller 3
G
NOTE:
Take care so that the oil seal lip is not dam-
G
aged or the spring does not slip off its posi-
tion.
5PA41340
When installing the impeller shaft, apply the
G
lithium soap base grease on the oil seal lip
and impeller shaft. And install the shaft while
turning it.
Hold the impeller shaft on its width across
G
the flats a with spanners, etc. and install the
impeller.
5PA41350
2. Install:
Gasket (water pump housing) 1
G
5PA41360
3. Install:
Water pump housing 1
G
Bolt (water pump housing) 2
G
Copper washer (coolant drain bolt)
G
3
Coolant drain bolt 4
G
5PA41370
4 - 44
ENG
14 Nm (1.4 m · kg, 10 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
Publicité
