Publicité
CLUTCH AND PRIMARY DRIVEN GEAR
5PA40920
5PA40930
5PA40940
5PA40950
7. Install:
Pressure plate 1
G
NOTE:
Align the punch mark a on the pressure plate
with the punch mark b on the clutch boss.
8. Install:
Clutch spring 1
G
Bolt (clutch spring) 2
G
NOTE:
Tighten the bolts (clutch spring) in stage, using
a crisscross pattern.
9. Install:
Dowel pin 1
G
Gasket (clutch cover) 2
G
10. Install:
Clutch cover 1
G
Bolt (clutch cover) 2
G
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
4 - 32
ENG
6 Nm (0.6 m · kg, 4.3 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
Publicité
