Publicité
KICK SHAFT, SHIFT SHAFT AND PRIMARY DRIVE GEAR
3
2
5PA41160
5PA41170
3
1
5PA41180
5PA41190
Primary drive gear
1. Install:
Straight key 1
G
2. Install:
Primary drive gear 1
G
Conical washer 2
G
Nut (primary drive gear) 3
G
NOTE:
Install the conical washer to the crankshaft 4
as shown in the illustration.
3. Tighten:
Nut (primary drive gear) 1
G
Use the drive gear holder 2.
Drive gear holder:
YM-01495/90890-01495
NOTE:
Hold the drive gear holder onto the crankcase
using the M6 bolts 3.
4. Install:
Primary driven gear
G
Refer
to
DRIVEN GEAR" section.
5. Install:
Dowel pin 1
G
Gasket (right crankcase cover) 2
G
4 - 39
ENG
79 Nm (7.9 m · kg, 57 ft · lb)
"CLUTCH
AND
PRIMARY
Publicité
