Publicité
CDI MAGNETO
5. Tighten:
Screw (stator) 1
G
6. Check:
Ignition timing
G
Re-check the ignition timing.
5PA41460
7. Connect:
CDI magneto lead 1
G
Refer to "CABLE ROUTING DIAGRAM"
section in the CHAPTER 2.
5PA41470
8. Install:
Gasket (left crankcase cover)
G
Left crankcase cover 1
G
Screw (left crankcase cover) 2
G
NOTE:
Tighten the screws in stage, using a crisscross
pattern.
5PA41480
4 - 48
ENG
8 Nm (0.8 m · kg, 5.8 ft · lb)
5 Nm (0.5 m · kg, 3.6 ft · lb)
Publicité
