Adjustment Of The Handlebar With Adjustable Stem; Assembly And Disassembly Of The Wheels; Quick Release Wheel System - BH ATOM CROSS PRO Notice

Do not tighten the upper part screw; only use them to eliminate
play!
Adjust the front part so the handlebar is inclined. Also examine
the upper tube and the front part of the front tyre. Tighten the
torque screws of the front part (c). Use a torque spanner that does
not exceed the maximum torque limits! You will find information in
«Recommended torque limits» chapter, about the components
and/or the instructions from the manufacturer of the components.
Take into account that the fork tube can be squashed if the
screws are over-tightened.
Carry out the previously indicated controls. The steering set should
not be over-tightened, because it can be easily damaged.
If the steering set is not adjusted correctly this can be caused
by many reasons. If you are not completely sure or you have
any doubts, contact your local BH workshop!
Make sure of the correct adjustment of the steering stem.
Place the front wheel between your knees and try to turn the
handlebar if it moves then it is not correctly adjusted, you may
suffer falls.
a
b

4.2.2 Adjustment of the handlebar with adjustable stem.

La potencia regulable permite la optimización de la posición del
The adjustable stem allows optimal positioning of the assembly by
adjusting the inclination of the axis within a range of -10º (lowest
position) to 10º (highest position).
The stem angles can be slightly adjusted following these steps:
■ Loosen the lateral screw (right side) (a) until the axis moves freely
■ Adjust the inclination of the stem until obtaining the desired
■ Tighten the lateral screw taking into account the recommended

4.3 Assembly and disassembly of the wheels

4.3.1 Quick release wheel system

Disassembly: Pull the blocking lever and change it from the
«CLOSE» to the «OPEN» position (b). Loosen the adjustment thread
by hand and release the wheel.
c a
angle.
torque indicated on the stem.
b
45
DE
AR
ZH
ZH
DK
EN
(
UK)
EN
(
US)
FR
EN
(
UK)
IT
JA
KO
NL
RU
SV
CE
UK