Rear Suspension - BH ATOM CROSS PRO Notice

DE
AR

8.2 Rear suspension.

The rear suspension allows vertical movement of the rear wheel, to
ZH
absorb all terrain irregularities.
ZH
This manual is a supplement of the information from the supplier of
the shock absorber, in the event that you do not receive it, you can
download it from the website of the supplier.
DK
Maintenance and care of the following parts is necessary to maintain
EN
the best behaviour of your rear suspension:
(
UK)
- Frame
EN
(
US)
- Oscillating arm
FR
- Bearings
EN
- Fixing components
(
UK)
- Rear shock absorbers
IT
JA
For correct operation of the system, it is important that all the
components are well tightened according to the torque indicated
KO
for each moving point and the rear shock absorber is well adjusted
according to the rider's weight, riding manner, and the type of terrain
NL
usually ridden on.
Keep the suspension components clean. Dirt, mud and other
RU
contaminants can cause premature wear or fatigue in the
suspension system. To clean the suspension systems use a cloth
or soft-bristle brush with soap and water. Do not use solvents or
SV
chemical products that can eliminate lubrication of the bearings and
the rear shock absorber.
CE
52
UK
Take into account that the rear of bicycle will drop slightly droop
when you sit on the bicycle, this is normal and it allows the
suspension to operate in an optimal manner in order. This should
be adjusted according to the weight of the cyclist and the terrain /
conditions the bicycle will be used on.
This adjustment requires specific knowledge and tools, consult with
your local dealer for correct adjustment of the suspension.
In compressed air shock absorbers, take note of permitted
settings and pressures, check these settings and pressures
regularly. Defective adjustment of the shock absorber can
cause irregular performance or cause damage to
the system.